2009-2016 上海交通大学 机械工程 工学博士
2005-2009 天津大学 机械设计制造及其自动化 工学学士

2021-至今 太阳成集团tyc7111cc 副教授
2018-2020 太阳成集团tyc7111cc 助理教授
2017-2018 德国Helmholtz-Jüich研究中心 博士后
2016-2018 太阳成集团tyc7111cc 博士后

薄板构件装配理论与技术
新能源电池制造及诊断研究
燃料电池多尺度建模与仿真



欢迎对新能源电池或微细制造方向感兴趣的本科、硕士、博士联系

2023-2026 国家重点研发计划课题 “单电池全尺寸结构及伏安性能设计仿真模块开发” 负责人
2021-2024 国家自然基金面上项目 “燃料电池层叠装配的气体扩散层细观接触行为及调控机制” 负责人
2021-2024 广州市重点研发计划课题 “基于金属双极板的燃料电池电堆开发及验证” 负责人
2018-2020 国家自然基金青年项目 “燃料电池质子交换膜机械失效机理与预测模型”， 负责人
2020-2023 上海市自然基金 “燃料电池运行工况下质子交换膜细观损伤行为及失效预测模型” 负责人
2017-2021 国家重点研发计划子课题 “金属双极板制备技术及表面镀层开发” 负责人
2017-2020 上海汽车工业科技发展基金 “燃料电池金属双极板镀层失效分析与工艺优化” 负责人
2020-2023 企业合作项目 “燃料电池金属极板开发基础研究” 负责人
2020-2021 机械系统与振动国家重点实验室自主课题 负责人
2018-2021 上海交通大学新进教师启动计划项目 负责人
2018-2019 博士后基金特别资助 “基于银纹扩展的燃料电池质子交换膜机械疲劳行为研究” 负责人
2017-2018 博士后基金面上项目 “金属极板燃料电池层叠式装配建模及失效机理研究” 负责人

2014-2017 上海科技创新行动计划 “超薄燃料电池金属极板研究与开发” 参与
2014-2016 国家自然科学基金青年项目 “燃料电池金属气体扩散层结构的力学行为建模及成形成性工艺” 参与
2013-2015 国家863项目子课题 “燃料电池低成本膜电极组件/双极板及电堆制备技术研究” 参与
2014-2015 上海汽车工业（集团）总公司，“2014年度燃料电池用金属双极板开发” 参与
2013-2016 国家自然科学基金面上项目 “电致塑性辅助微细模压成形介观尺度效应机理与工艺研究 ” 参与

2023年度

D. Qiu, X. Zhou, M. Chen, Z. Xu, L. Peng. Optimization of control strategy for air-cooled PEMFC based on in-situ observation of internal reaction state. Appl Energ. 350 (2023) 121752.
Z. Zhou, L. Ye, D. Qiu, L. Peng, X. Lai. Experimental investigation and decoupling of voltage losses distribution in proton exchange membrane fuel cells with a large active area. Chem Eng J. 452 (2023) 139497.
X. Zhou, D. Qiu, L. Peng, X. Lai. Modeling the viscoelastic-viscoplastic behavior of glassy polymer membrane with consideration of non-uniform sub-chains in entangled networks. Int J Solids Struct. 282 (2023) 112469.
X. Zhou, D. Qiu, L. Peng, X. Lai. Numerical and experimental characterization of gas permeation through membranes with consideration of mechanical degradation in proton exchange membrane fuel cells. J Power Sources. 556 (2023) 232489.
Z. Xu, D. Qiu, M.M. Shahzamanian, Z. Zhou, D. Mei, L. Peng. An improved springback model considering the transverse stress in microforming. Int J Mech Sci. 241 (2023) 107947.
W. Liu, D. Qiu, L. Peng, X. Lai. Study on the nonuniform mechanical degradation of membranes considering temperature and relative humidity distribution in proton exchange membrane fuel cells. Fuel Cells. 23 (2023) 170-80.

2022年度

D. Qiu, P. Liang, X. Zhao, Y. Wang, L. Peng, X. Lai. An analytical model for gas leakage through contact interface in proton exchange membrane fuel cells. Int J Hydrogen Energ. 47 (2022) 32273-86.
L. Ye, D. Qiu, L. Peng, X. Lai. Microstructures and electrical conductivity properties of compressed gas diffusion layers using X-ray tomography. Appl Energ. 326 (2022) 119934.
Y. Wan, D. Qiu, P. Yi, L. Peng, X. Lai. Design and optimization of gradient wettability pore structure of adaptive PEM fuel cell cathode catalyst layer. Appl Energ. 312 (2022) 118723.
Z. Zhou, D. Qiu, L. Peng, X. Lai. Channel/rib patterns optimization of a proton exchange membrane fuel cell by combining down-the-channel performance model and genetic algorithm. Int J Heat Mass Tran. 183 (2022) 122235.
P.a. Li, D. Qiu, L. Peng, S. Shen, X. Lai. Analysis of degradation mechanism in unitized regenerative fuel cell under the cyclic operation. Energ Convers Manag. 254 (2022) 115210.
P.a. Li, D. Qiu, L. Peng, X. Lai. kW-grade unitized regenerative fuel cell stack design for high round-trip efficiencies. Energ Convers Manag. 270 (2022) 116277.
S. Liao, D. Qiu, P. Yi, L. Peng, X. Lai. Modeling of a novel cathode flow field design with optimized sub-channels to improve drainage for proton exchange membrane fuel cells. Energy. 261 (2022) 125235.
F. Huang, D. Qiu, L. Peng, X. Lai. Optimization of entrance geometry and analysis of fluid distribution in manifold for high-power proton exchange membrane fuel cell stacks. Int J Hydrogen Energ. 47 (2022) 22180-91.
Z. Zhang, M. Guo, Z. Yu, S. Yao, J. Wang, D. Qiu, et al. A novel cooperative design with optimized flow field on bipolar plates and hybrid wettability gas diffusion layer for proton exchange membrane unitized regenerative fuel cell. Energy. 239 (2022) 122375.

2021年度

D. Qiu, L. Peng, P. Yi, W. Lehnert, X. Lai, Review on proton exchange membrane fuel cell stack assembly: Quality evaluation, assembly method, contact behavior and process design, Renewable and Sustainable Energy Reviews, 152 (2021) 111660.
Z. Zhou, D. Qiu*, L. Peng, X. Lai, Channel/rib patterns optimization of a proton exchange membrane fuel cell by combining down-the-channel performance model and genetic algorithm, Int J Heat Mass Tran, 183 (2022) 122235.
F. Huang, D. Qiu, Z. Xu, L. Peng, X. Lai, Analysis and improvement of flow distribution in manifold for proton exchange membrane fuel cell stacks, Energy, 226 (2021) 120427.
P.a. Li, D. Qiu, L. Peng, S. Shen, X. Lai, Analysis of degradation mechanism in unitized regenerative fuel cell under the cyclic operation, Energ Convers Manag, 254 (2022) 115210.
W. Yue, D. Qiu, P. Yi, L. Peng, X. Lai, Study on the degradation mechanism of the frame for membrane electrode assembly in proton exchange membrane fuel cell, Int J Hydrogen Energ, 46 (2021) 36954-36968.
L. Peng, Y. Wan, D. Qiu, P. Yi, X. Lai, Dimensional tolerance analysis of proton exchange membrane fuel cells with metallic bipolar plates, J Power Sources, 481 (2021) 228927.
Z. Zhang, M. Guo, Z. Yu, S. Yao, J. Wang, D. Qiu*, L. Peng, A novel cooperative design with optimized flow field on bipolar plates and hybrid wettability gas diffusion layer for proton exchange membrane unitized regenerative fuel cell, Energy, 239 (2022) 122375.

2020年度

Qiu D, Peng L, Tang J, Lai X. Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels. Energy. 2020;198:117334.
Qiu D, Liang P, Peng L, Yi P, Lai X, Ni J. Material behavior of rubber sealing for proton exchange membrane fuel cells. Int J Hydrogen Energ. 2020;45(8):5465-73.
Peng L, Shao H, Qiu D, Yi P, Lai X. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells. J Power Sources. 2020;453:227836.
Huang F, Qiu D, Lan S, Yi P, Peng L. Performance evaluation of commercial-size proton exchange membrane fuel cell stacks considering air flow distribution in the manifold. Energ Convers Manag. 2020;203:112256.
Zhou Z, Qiu D, Zhai S, Peng L, Lai X. Investigation of the assembly for high-power proton exchange membrane fuel cell stacks through an efficient equivalent model. Appl Energ. 2020;277:115532.
Liu W, Qiu D, Peng L, Yi P, Lai X. Mechanical degradation of proton exchange membrane during assembly and running processes in proton exchange membrane fuel cells with metallic bipolar plates. Int J Energ Res. 2020;44:8622-34.
Xu Z, Qiu D, Yi P, Peng L, Lai X. Towards mass applications: A review on the challenges and developments in metallic bipolar plates for PEMFC. Progress in Natural Science: Materials International. 2020.

2019年度

Qiu D, Peng L, Lai X, Ni M, Lehnert W, Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell, Renewable and Sustainable Energy Reviews, 2019; 113:109289.
Shao H, Qiu D, Peng L, Yi P, Lai X, In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells, Journal Of Power Sources, 2019; 412:717-724.
Shao H, Qiu D, Peng L, Yi P, Lai X, Modeling and analysis of water droplet dynamics in the dead-ended anode gas channel for proton exchange membrane fuel cells, Renewable Energy, 2019; 138:842-851.
Xu Y, Qiu D, Yi P, Lan S, Peng L, An integrated model of the water transport in nonuniform compressed gas diffusion layers for PEMFC, International Journal Of Hydrogen Energy, 2019; 44:13777-13785.
Irmscher P, Qiu D, Janßen H, Lehnert W, Stolten D, Impact of gas diffusion layer mechanics on PEM fuel cell performance, International Journal Of Hydrogen Energy, 2019; 44:23406-23415.

2018年度

Qiu D*, Janßen H, Peng L, Irmscher P, Lai X, Lehnert W, Electrical resistance and microstructure of typical gas diffusion layers for proton exchange membrane fuel cell under compression, Applied Energy, 2018; 231:127-137.
Qiu D, Peng L*, Liang P, Yi P, Lai X, Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells, Energy, 2018; 165:210-222.
Qiu D, Peng L*, Yi P, Lai X, Lehnert W, Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments, Energy Conversion And Management, 2018; 174:814-823.
Liang P, Qiu D, Peng L, Yi P, Lai X*, Ni J, Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates, Energy Conversion And Management, 2018; 169:334-344.

2017年度

Qiu D, Peng L, Yi P, Lai X*, A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper, International Journal Of Mechanical Sciences, 2017; 124–125:37-47.
Qiu D, Peng L, Yi P, Lai X*, Janßen H, Lehnert W, Contact behavior modelling and its size effect on proton exchange membrane fuel cell, Journal Of Power Sources, 2017; 365:190-200.

2016年以前
Qiu D, Yi P, Peng L, Lai X*, Channel Dimensional Error Effect of Stamped Bipolar Plates on the Characteristics of Gas Diffusion Layer Contact Pressure for Proton Exchange Membrane Fuel Cell Stacks, ASME-Journal of Fuel Cell Science and Technology, 2015; 12:041002.
Qiu D, Yi P, Peng L, Lai X*, Assembly design of proton exchange membrane fuel cell stack with stamped metallic bipolar plates, International Journal Of Hydrogen Energy, 2015; 40:11559-11568.
Qiu D, Yi P, Peng L, Lai X*, Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell, International Journal Of Hydrogen Energy, 2013; 38:6762-6772.
Peng L, Qiu D, Yi P, Lai X*, An Analytical Model for Contact Pressure Prediction Considering Dimensional Error of Stamped Bipolar Plate and Gas Diffusion Layer in Proton Exchange Membrane Fuel Cell Stack Assembly, ASME-Journal of Electrochemical Energy Conversion and Storage, 2016; 13:021007.
Liang P, Qiu D, Peng L, Yi P, Lai X*, Ni J, Structure failure of the sealing in the assembly process for proton exchange membrane fuel cells, International Journal Of Hydrogen Energy, 2017; 42:10217-10227.

会议论文

Qiu D, Peng L, Yi P, Lai X, Janßen H, Lehnert W, Multiscale Numerical Model for Contact Resistance Prediction in the Proton Exchange Membrane Fuel Cell, ECS Transactions, 2017; 80:73-85.
Qiu D, Yi P, Peng L, Lai X, An Assembly Model for PEM Fuel Cell with Consideration of Size Error Effect of Bipolar Plate. 20th World Hydrogen Energy Conference, WHEC 2014, Gwangju City，Korea，2014.06.16-06.21.
Philipp Irmscher, Diankai Qiu, Holger Janßen, Werner Lehnert, Detlef Stolten, Impact of Gas Diffusion Layer Mechanics on PEM Fuel Cell Performance, ECS conference paper.
Huang F, Qiu D, Peng L, Lai X. Entrance Effects on the Flow Distribution in Manifold of Commercial-Size Proton Exchange Membrane Fuel Cell Stacks. ECS Transactions. 2019;92(8):375-85.

本科生课程：工程材料、设计与制造III、工程学导论

研究生课程：氢能与燃料电池、误差分析与测试数据处理

燃料电池电堆的自动化装配装置，授权专利号：ZL 201110065618.2
用于燃料电池的金属气体扩散层及其制备方法，授权专利号：ZL 201010605127.8
一种双向可逆燃料电池系统， 授权专利号：ZL 201710631167.1
一种可逆燃料电池阴极流场结构及可逆燃料电池， 授权专利号：ZL201710712660.6
高深宽比金属薄板微细结构的加工装置及方法， 授权专利号： ZL201611091387.1
用于制备燃料电池金属双极板非晶碳膜磁控溅射连续线， 授权专利号： ZL201610984083.1
一种温湿度均匀性增强的燃料电池单电池及电堆， 授权专利号： ZL201710741058.5
一种燃料电池金属双极板高效环形真空镀膜装置， 授权专利号： ZL201710660443.7
等

2023 教育部青年长江学者
2021 上海市“青年科技启明星”
2021 中国机械工业科技进步一等奖（排9）
2020 中国汽车工业科学技术奖一等奖 （排6）
2019 上海市技术发明特等奖（排9）


2023 中国大学生机械工程创新创意大赛· 毕业设计大赛 金奖 （指导教师）
2023 上海交通大学教学成果特等奖（排5）
2023 机动学院最受欢迎教师奖
2022 “挑战杯” 全国特等奖（指导教师）
2022 上海交通大学 十佳班主任
2021 “挑战杯”上海市 特等奖（指导教师）
2021 上海交通大学 优秀班主任
2021 上海交通大学机动学院首聘期考核优秀


2011 "挑战杯" 全国特等奖
2016 上海市优秀毕业生
2011 上海市大学生课外学术科技作品竞赛一等奖
2014 小平科技创新团队（团队）
2012 上海交通大学校长奖（团队）
2018 博士后年度考核“优秀”