2003－2007上海交通大学机械制造及其自动化专业博士
1999－2003南京理工大学机械制造及其自动化专业学士

2008－2009 德国BIAS研究所 博士后
2009－2012 太阳成集团tyc7111cc 讲师
2013-至今 太阳成集团tyc7111cc 副教授
2015-至今 太阳成集团tyc7111cc 博士生导师

超快激光材料加工 （TBC材料打孔、玻璃材料微加工和焊接等）
常规激光材料加工（激光板材热成形、激光抛光等）

2019-2020 ***仿生拓扑优化、增材制造及其动力学性能评估，上海航天先进技术联合研究基金，负责人
2019-2020 ***表面精细结构超快激光加工工艺研究，上海航天先进技术联合研究基金，负责人
2018-2021 船舶大曲率不可展曲板的力-热协同变形与工艺规划研究，国家自然基金面上项目，负责人
2018-2020 ***安装板增材制造及试验研究，军委装备发展部共性技术课题，参与
2018-2022 上海交通大学-马鞍山博望高端数控机床研发中心，参与
2017-2018 智能曲板激光成型技术，装备预研船舶重工联合基金，负责人
2015-2016 不可展曲面热成形的板内板外变形综合方法研究，机械系统与振动国家重点实验室重点课题，负责人
2015-2019 屏蔽电机内冷流动规律与流固作用机理，973课题，学术骨干
2013-2016 超精密轴承研制及产业化,上海市产学研项目,副组长
2012-2014 薄板驱动器激光微矫形双变形机理与工艺规划研究，国家青年基金，负责人
2012-2014 滚动功能部件滚动摩擦机理及发热规律研究，国家重大专项子课题，负责人
2011-2014 机器人焊接生产线技术开发和应用示范，上海市“科技创新行动计划”项目，副组长
2011-2013 面向微电子器件装配的驱动器激光微矫形机理研究，博士点新教师基金，负责人
2011-2012 薄板驱动器的激光微矫形变形行为研究，教育部归国留学人员基金，负责人
2010-2011 微介观尺度下薄板驱动器激光微矫形机理与规律研究，机械系统与振动国家重点实验室自主研究课题，负责人
2010-2011 ****屏蔽电动泵电机内部流场分析，国家06专项二级子课题，第二负责人
2010-2012 激光热成形的非期望变形机理与精度控制方法研究，国家青年基金，参与
2009-2013 核主泵的性能仿真与实验，国家“973”课题，学术骨干

2019
1.Kai Zhao, Han Wang, Jingwen Yan, Hong Shen*. Welding fused silica glass by picosecond pulsed laser with low numerical aperture. ASME-Journal of Micro and Nano-Manufacturing, 2019, 7(4): 041007-8.
2.Jing Zhou, Conghao Liao, Hong Shen*, Xiaohong Ding. Surface and property characterization of laser polished Ti6Al4V. Surface and Coatings Techonlogy, 2019, 380: 125016-8
3.Jiacheng Song, Hong Shen*, Zhenqiang Yao. A new strategy for laser trepanning of tapered microholes. ASME-Journal of Micro and Nano-Manufacturing, 2019, 7(3): 031005.
4.Han Wang, Hong Shen*, Zhenqiang Yao. A two-step model for multiple picosecond and femtosecond pulses ablation of fused silica. ASME-Journal of Manufacturing Science and Engineering, 2019, 141(6): 061004-10
5.Hong Shen*, Juan Jiang, Decai Feng, Chen Xing, Xiaofeng Zhao*, Ping Xiao. Environmental effect on cracking behavior of YSZ during laser drilling. ASME-Journal of Manufacturing Science and Engineering, 2019, 141(5): 054501-5
6.Hong Shen*, Decai Feng. Thermal and mechanical behavior in laser trepan drilling of yttria-stabilized zirconia. ASME-Journal of Heat Transfer, 2019, 141(4): 042101-12.
7.Decai Feng, Hong Shen*. Hole quality control in underwater drilling of yttria stabilized zirconia using a picosecond laser. Optics & Laser Technology, 2019, 113: 141-149

2018
1.Jingwen Yan, Han Wang, Hong Shen*. Experiment-based quantitative analysis of picosecond pulse induced morphological changes in fused silica. ASME-Journal of Micro and Nano-Manufacturing, 2018, 6(4): 044501-5
2.Hong Shen*, Han Wang, Wentao Zhou. Process modelling in laser forming of doubly-curved sheets from cylinder shapes. Journal of Manufacturing Processes, 2018, 35: 373-381
3.Hong Shen*, Wentao Zhou, Han Wang. Laser forming of doubly curved plates using minimum energy principle and comprehensive strain control. International Journal of Mechanical Sciences, 2018, 145: 42-52.

2017
1. Han Wang, Hong Shen*. A prediction model for ablation fluence threshold in Femtosecond laser processing of fused silica. ASME-Journal of Micro and Nano-Manufacturing, 2017, 5(3): 031006-8.
2. Hong Shen*, Yanqing Pan, Jing Zhou, Zhenqiang Yao. Forming mechanism of bump shape in pulsed laser melting of stainless steels. ASME-Journal of Heat Transfer, 2017, 139(6): 062301-10.
3. Chi Zhang, Jing Zhou, Hong Shen*. Role of capillary and thermocapillary forces in laser polishing of metals. ASME-Journal of Manufacturing Science and Engineering, 2017, 139(4): 041019-11.
4. Hong Shen*, Decai Feng, Zhenqiang Yao. Modelling of underwater laser drilling of alumina. ASME-Journal of Manufacturing Science and Engineering, 2017, 139(4): 041008-10.

2016
1. Hong Shen*, Yutao Zheng, Han Wang and Zhenqiang Yao. Heating Position Planning in Laser Forming of Single Curved Shapes Based on Probability Convergence. ASME-Journal of Manufacturing Science and Engineering, 2016, 138(9): 091003-7
2. Hong Shen*, Han Wang, Jun Hu and Zhenqiang Yao. Processing Optimization in Multi Heating Positions for Laser Thermal Adjustment of Actuators. ASME-Journal of Manufacturing Science and Engineering, 2016, 138(6): 061012-10
3. Hong Shen*, Han Wang, Jun Hu, Zhenqiang Yao. An elastic approach for developing non-developable sheets. International Journal of Mechanical Sciences, 2016, 106: 138-146
4. Jing Zhou, Hong Shen*, Yanqing Pan, Xiaohong Ding. Experimental study on laser microstructures using long pulse. Optics and Lasers in Engineering, 2016, 78: 113-120

2015
1.Hong Shen*, Han Wang, Jun Hu, Zhenqiang Yao. The process planning in laser thermal adjustment of three cut-outs actuators. International Journal of Precison Engineering and Manufacturing, 2015, 16(12): 2475-2482
2.Hong Shen*, Jun Hu, Zhenqiang Yao. The interactive effects on deformation behavior in laser thermal adjustment of two-bridge actuators. International Journal of Machine Tools and Manufacture, 2015, 90: 1-7

2014
1. Hong Shen*, Maoli Ran, Jun Hu, Zhenqiang Yao. An experimental investigation of underwater pulsed laser forming. Optics and Lasers in Engineering, 2014, 62: 1-8.
2. Hong Shen*, Jun Hu and Zhenqiang Yao. Mixed-dimensional coupling modeling for laser forming process. Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, 2014, 228(16): 2950-2959.

2012
1.Hong Shen*, Jun Hu, Xiang Yu, Zhenqiang Yao. The effects of cut-out on stress distribution and deformations in laser thermal adjustment. International Journal of Machine Tools & Manufacture, 2012, 62: 46–52
2.Hong Shen*, Jun Hu, Zhenqiang Yao. Analysis and prediction of the in-plane deformation in laser thermal adjustment. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 2012, 134(4), 044503-5
3.Hong Shen*, Chunming Gong, Jun Hu, Zhenqiang Yao. Numerical and experimental study on bi-direction deformations in laser micro forming of two-bridge actuators. International Journal of Machine Tools & Manufacture, 2012, 54-55: 66–72

2011
1.Hong Shen*, Zhenqiang Yao (2011). Numerical and Experimental Investigation of Cooling Time in Laser Micro-adjustment of Two-bridge Actuators. Applied Thermal Engineering, 31: 1447-1456

2010
1.Hong Shen*, Linfa Peng, Jun Hu, Zhenqiang Yao (2010). Study on the mechanical behavior of laser micro-adjustment of two-bridge actuators. Journal of Micromechanics and Microengineering, 20, 115010
2.Hong Shen*, Jun Hu, Zhenqiang Yao (2010). Analysis and control of edge effects in laser bending. Optics and Lasers in Engineering, 48, (3): 305–315

2009
1.Hong Shen*, Frank Vollertsen (2009). Modelling of laser forming-An review. Computational Materials Science, 46, (4): 834-840
2.Hong Shen* and Zhenqiang Yao (2009). Study on mechanical properties after laser forming. Optics and Lasers in Engineering, 47, (1): 111–117.

课程名称： 工程学导论
授课对象：本科生一年级
学时数： 64
学分：4

课程名称：制造工艺I
授课对象：本科生三年级
学时数： 64
学分：4

2014-2017，中国机械工程学会特种加工分会激光加工技术委员会，委员
2015- ，Challenge Journal of Structural Mechanics，编委

德国洪堡学者，2008
上海市科技进步奖二等奖，2010
晨星计划C类，2011
上海市科技进步奖三等奖，2013
晨星计划B类，2013
上海市技术发明一等奖，2016